Labonville Apron Wrap Chainsaw Chaps W850KP

Labonville Apron Wrap Chainsaw Chaps W850KP

Delta Plus ProChapsZ 91Z Series Apron Chainsaw Chaps

Delta Plus ProChapsZ 91Z Series Apron Chainsaw Chaps

Delta Plus ProChaps 90 Series Apron Chainsaw Chaps

SKU
ELV JE9000
SKU
ELV JE9000 33
SKU
ELV JE9000 36
SKU
ELV JE9000 39
Economic chainsaw protection chaps from Delta Plus. Delta Plus ProChaps apron chaps are designed to reduce the risk or severity of injury to your front leg area in the case of a cutting mishap. 90 Series chaps have a 420 Denier nylon blaze orange covering with waterproof polyurethane coating. Protection comes from multilayers of Exclusive Prolar padding stops and jams a chain saw in milliseconds. ProChaps come with a 2" adjustable waist belt (fits waist sizes from 28" to 42") and 1" adjustable leg straps with quick snap fasteners. Has a zippered front pocket. Delta Plus chainsaw chaps are UL certified to ASTM standards. Designed to hand wash or gentle cycle with non-chlorine bleach detergents and hang to dry.
$109.99
$109.99
$109.99
$109.99

Shipping Weight 2.0 lbs.

Shipping Weight 2.1 lbs.

Shipping Weight 2.3 lbs.

In stock
In stock
In stock
In stock
Outer Layer Material 420 Denier Nylon Fabric
Outer Layer Coating Polyurethane for Water Resistance
Protective Padding Material Multilayer PROLAR High Tenacity Polyester
Safety Certifications 
UL Certified in Accordance with ASTM F1414
Meets ASTM F1897 Leg Protection for Chain Saw Users
BNQ/CUL Certified for Class B Standards 1923-450-M91
Meets OSHA Regulation 1910-266 for Logging Operations
Meets ANSI Z133.1 2012 Standards for Tree Care Operations

Chainsaw Chap Fitment Information
Chainsaw chaps are not sized the same way your pants are. Chainsaw chaps are measured from the top of your belt down to the ankle area. Just hook a tape measure in your trousers and go to the top of your foot. Chainsaw chaps should be properly fitted with the adjustable buckles. They should be worn snug, not loose or tight.

Chainsaw Pant & Chap Safety Information
Chainsaw protective pants and chaps are not represented as a shield against damage, but as an aid to help prevent more severe damage in extreme cases. Chainsaw protective pants and chaps contain material designed to reduce the risk or severity of an injury, and give the operator extra reaction time when contact is made by a moving saw chain. The cut retardant material is designed to "pull" apart and clog up the sprocket system of a gas powered chainsaw and slow or stop the chain from rotating depending on the speed of the chain, length and angle of contact and the power of the saw. Protective pants and chaps should never be considered safer than proper and correct chainsaw handling safety procedures. Chainsaw pants and chaps are designed for gas powered chainsaws and will not stop the sprocket on most electric powered chainsaws.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account