Delta Plus ProChapsZ 91Z Series Apron Chainsaw Chaps
SKU
ELV JE9130Z
SKU
ELV JE9130Z 33 ORG
SKU
ELV JE9130Z 36 ORG
SKU
ELV JE9130Z 39 ORG
Professional chainsaw protection chaps from Delta Plus. Delta Plus ProChapsZ apron chaps have reduced catch points, designed to reduce the risk of snagging when working around brush chippers. ProChapsZ apron chaps are also designed to reduce the risk or severity of injury to your front leg area in the case of a cutting mishap. 91Z Series chaps have a tough 1000 Denier nylon blaze orange covering with waterproof polyurethane coating. Protection comes from multilayers of Exclusive Prolar padding. ProChaps come with a 2" adjustable waist belt (fits waist sizes from 28" to 42") and 1" adjustable leg straps with quick snap fasteners. Has a velcro front pocket. Delta Plus chainsaw chaps are UL certified to ASTM standards. Designed to hand wash or gentle cycle with non-chlorine bleach detergents and hang to dry.
|
Outer Layer Material 1000 Denier Nylon Fabric Outer Layer Coating Polyurethane for Water Resistance Protective Padding Material Multilayer PROLAR High Tenacity Polyester Safety Certifications UL Certified in Accordance with ASTM F1414 Meets ASTM F1897-2008 Leg Protection for Chain Saw Users BNQ/CUL Certified for Class B Standards 1923-450-M91 Meets OSHA Regulation 1910-266 for Logging Operations Meets ANSI Z133.1 2012 Standards for Tree Care Operations Chainsaw Chap Fitment Information Chainsaw chaps are not sized the same way your pants are. Chainsaw chaps are measured from the top of your belt down to the ankle area. Just hook a tape measure in your trousers and go to the top of your foot. Chainsaw chaps should be properly fitted with the adjustable buckles. They should be worn snug, not loose or tight. Chainsaw Pant & Chap Safety Information Chainsaw protective pants and chaps are not represented as a shield against damage, but as an aid to help prevent more severe damage in extreme cases. Chainsaw protective pants and chaps contain material designed to reduce the risk or severity of an injury, and give the operator extra reaction time when contact is made by a moving saw chain. The cut retardant material is designed to "pull" apart and clog up the sprocket system of a gas powered chainsaw and slow or stop the chain from rotating depending on the speed of the chain, length and angle of contact and the power of the saw. Protective pants and chaps should never be considered safer than proper and correct chainsaw handling safety procedures. Chainsaw pants and chaps are designed for gas powered chainsaws and will not stop the sprocket on most electric powered chainsaws. |
Write Your Own Review